3D analysis of maxillomandibular morphology in hyperdivergent and hypodivergent individuals: A cross-sectional study.

INTRODUCTION: The aim of this cross-sectional study was to investigate maxillomandibular morphology in hyperdivergent and hypodivergent individuals, using 3D surface models generated by cone-beam computed tomography (CBCT). METHODS: The sample consisted of 60 CBCTs (30 males, 30 females) patients aged 12-30 years, divided into two groups comprising hyperdivergent (≥35°) and hypodivergent (≤30°) individuals, according to the mandibular plane (MP) angle. Multiplanar reconstructions were used to mark the landmarks, and 3D surface models were created to evaluate structures of the maxillomandibular complex, including condyle, ramus, symphysis and palatal height. Intergroup comparisons were performed by independent t-test. Pearson's correlation test was used (P < .05) to evaluate the correlation of the MP angle with the angles and linear measurements of other structures. RESULTS: Significant differences were found between the groups regarding condylar width, ramus height, condylar plus ramus height, mandibular length, gonial angle, palatal plane angle and palatal-mandibular angle. No differences (P > .05) were found for the condylar height, symphysis inclination angle or palatal height. Correlations (P < .05) were found between the MP angle and structures of the maxillomandibular complex. CONCLUSIONS: Hyperdivergent (MP ≥ 35°) and hypodivergent (MP ≤ 30°) individuals present different skeletal morphology regarding condylar width, ramus height, condylar plus ramus height, mandibular length, gonial angle, palatal plane angle and palatal-mandibular angle. There is a significant correlation between MP angle and morphological structures such as condyle, ramus, symphysis, palatal plane angle and palatal-mandibular angle.

Expansão rápida da maxila apoiada em mini-implantes (MARPE): efeitos da ancoragem bicortical (in vitro) e análise clínica da espessura óssea alveolar vestibular através de revisão sistemática e meta-análise / Mini-implant assisted rapid palatal expansion (MARPE): the effects of bicortical anchorage (in vitro) and buccal alveolar bone thickness clinical analysis through systematic review and meta-analysis

O objetivo desse estudo foi avaliar, in vitro, a influência mecânica do tipo de ancoragem (monocortical ou bicortical), utilizada na técnica de expansão rápida da maxila apoiada em mini-implantes (MARPE), na microarquitetura óssea trabecular onde o disjuntor é instalado, e, analisar, através de revisão sistemática e meta-análise, os efeitos desta técnica na espessura da tábua óssea vestibular dos dentes de suporte, comparando com a técnica de expansão convencional. Dezesseis mini-implantes do tipo auto-perfurantes foram distribuídos em dois grupos (dois dispositivos MARPE com 4 mini-implantes cada grupo) de acordo com o tipo de inserção óssea (monocortical e bicortical), instalados em osso de costela bovina, e, ativados em cinco tempos distintos onde a cada ativação, o corpo de prova era microtomografado. O espaçamento das trabéculas (Tb.Sp [mm]) foi o parâmetro utilizado para avaliar a microarquitetura óssea em cinco regiões de interesse (ROI) peri-implantar (osso ao redor do dispositivo, superior, inferior, anterior e posterior). O teste ANOVA two-way com análise post-hoc de Tukey (α = 0,05) foi usado para avaliar o efeito do tipo de inserção na microarquitetura óssea durante os ciclos de ativação. O efeito do tempo foi avaliado usando o teste ANOVA-MR com correção de Bonferroni (α = 0,003). Para responder à pergunta da revisão sistemática, as bases PubMed (MEDLINE), Scopus, Web of Science, The Cochrane Library, Virtual Health Library e OpenGrey foram utilizadas até março de 2019. Avaliações de risco de viés foram realizadas usando as ferramentas Cochrane Collaboration e ROBINS- I. No estudo in vitro, apenas o ROI superior (cervical) teve diferença significativa (p <0,003) após o quarto ciclo de ativação ao longo do tempo entre as ativações. Para o grupo monocortical, o espaçamento trabecular foi afetado quando todo o ROI foi analisado a partir do quarto ciclo de ativação, enquanto para o ROI superior, essa diferença tornou-se aparente a partir do terceiro ciclo de ativação (p <0,003). Em relação a revisão sistemática, as evidências limitadas indicaram que pacientes tratados com a técnica convencional tiveram uma perda maior da espessura óssea alveolar vestibular em comparação com pacientes usando MARPE (p=0,001). As análises de subgrupo mostraram que as diferenças foram significativas em ambas as regiões de pré-molares, direita (p = 0,004) e esquerda (p <0,0001). Baseado nos resultados encontrados pode-se concluir que a ancoragem monocortical é mais suscetível a danos ósseos ao redor dos mini- implantes, sendo a região superior (cervical) mais afetada. Assim como, evidências limitadas sugerem que o MARPE pode diminuir a perda do osso alveolar vestibular quando comparado a técnica de expansão convencional. (AU)

This study aimed to evaluate, in vitro, the mechanical influence of the type of anchorage (monocortical or bicortical), that is used in the mini-implant assisted rapid palatal expansion (MARPE) technique, on the trabecular bone microarchitecture where the appliance is installed, and to analyze, through systematic review and meta-analysis, the effects of this technique on the buccal palatal bone thickness of the supporting teeth, compared to the conventional technique. Sixteen self-drilling mini-implants were distributed into two groups (two MARPE devices with 4 mini-implants each group) according to the type of bone insertion (monocortical and bicortical), installed in bovine rib bone, and activated five different times where at each activation, the specimen was microtomographed. Trabecular spacing (Tb.Sp [mm]) was the parameter used to assess bone microarchitecture in five peri-implant regions of interest (ROI) (the whole area around the device, superior, inferior, anterior ,and posterior ). The two-way ANOVA test with post-hoc Tukey analysis (α = 0.05) was used to assess the effect of insertion type on bone microarchitecture during activation cycles.The effect of time was evaluated using the ANOVA-MR test with Bonferroni correction (α = 0.003). To answer the systematic review question, PubMed (MEDLINE), Scopus, Web of Science, The Cochrane Library, Virtual Health Library and OpenGrey databases were used for research until March 2019. Bias risk assessments were performed using the Cochrane Collaboration and ROBINS-I tools. In the in vitro study, only the superior (cervical) ROI had a significant difference (p<0.003) after the fourth activation cycle. For the monocortical group, trabecular spacing was affected when the whole area ROI was analyzed from the fourth activation cycle, on the other hand, when analyzing the superior ROI, this difference was significant from the third activation over time between the actvations (p<0.003). Regarding the systematic review, limited evidence indicated that patients treated with the conventional technique had a greater loss of buccal alveolar bone thickness compared to patients treated with the MARPE technique (p=0.001). Subgroup analyzes showed that differences were significant in both the right (p = 0.004) and left (p < 0.0001) premolar regions. Based on the results found, it can be concluded that monocortical anchorage is more susceptible to bone damage around the mini-implants, and the superior (cervical) region is more affected. As well, limited evidence suggests that MARPE technique may reduce the loss of buccal alveolar bone when compared to the conventional palatal expansion technique. (AU)

Dentofacial and skeletal pattern in African descendants from southeastern Brazil: clinical prospective study.

OBJECTIVE: The aim of this study was to evaluate characteristics of African-Brazilians young adults with excellent dental occlusion, including bimaxillary protrusion; compare them to European-American Caucasian standards, and determine whether there is sexual dimorphism in the display of this phenotype. METHODS: Lateral cephalometric radiographs were obtained from 43 African-Brazilians within military personnel (28 males and 15 females, average age 22.4 ± 3.4 years) with normal occlusion, selected from a group of 394 volunteers. Thirty-one angular and linear measurements were evaluated. Student's t-test for independent samples was used to compare results with those established by European-American standards, previously described in the literature. RESULTS: Considering the dentoalveolar pattern, seven angular and six linear measurements showed statistically significant differences (p< 0.001) when compared to Caucasian cephalometric standards. African-Brazilians' subjects showed lower cranial base angle (SNAr = 119.87 ± 5.66º) and anterior cranial base length (SN-distance = 68.63 ± 4.50 mm) (p< 0.001). The maxilla (SNA = 88.51 ± 3.23º) and the mandible (SNB = 85.06 ± 3.24º) were protruded in relation to the SN line (p< 0.001). Sexual dimorphism was significant for L1.NB (degrees) (p< 0.01), and interincisal angle (U1.L1) (p< 0.05). CONCLUSION: African-Brazilian young adults presented differences regarding dental and craniofacial characteristics, when compared to European-American norms. It can be stated that Caucasian cephalometric norms should not be applied to African-Brazilian faces.

In-vitro trabecular bone damage following mono- and bicortical mini implants anchorage in mini-implant assisted rapid palatal expansion (MARPE).

OBJECTIVES: To assess in-vitro trabecular bone damage following mono- and bicortical mini-implant (MI) anchorage in mini-implant assisted rapid palatal expansion (MARPE). MATERIAL AND METHODS: Sixteen self-drilling MI (four MARPE appliances) were distributed in two groups according to bone insertion (monocortical and bicortical) in bovine rib. The device was activated five times (0.5mm each). Trabecular bone damage was assessed using micro-CT scans made at baseline and after each activation by trabecular spacing parameter (Tb.Sp) (distance [mm] between the trabecular bone structure). These measurements were made in five different regions of interest (ROI) surrounding the screw (whole, superior, inferior, anterior and posterior). Two-way ANOVA with Tukey post-hoc analysis (α=0.05) was used to evaluate the effect of insertion type (monocortical vs. bicortical) and activation cycle (0-5) on trabecular damage. The time effect was evaluated using ANOVA-MR test effect with Bonferroni correction (α=0.003). The micro-CT images were also examined qualitatively. RESULTS: When analysing the individual ROIs, only the superior ROI had a significant difference (P<0.003) beginning at the fourth activation cycle. For the monocortical group, trabecular spacing was affected when the whole ROI was analysed beginning at the fourth activation cycle, while for the superior ROI, this difference became apparent beginning with the third activation cycle (P<0.003). For the qualitative analysis, it seems that only monocortical anchorage influences the trabecular bone in the superior area. CONCLUSIONS: Monocortical anchorage is more susceptible to bone damage around the MIs, with the superior (cervical) region most strongly affected.

Miniscrew-assisted rapid palatal expansion (MARPE): how to achieve greater stability. In vitro study.

OBJECTIVE: Assess the influence of mono- and bicortical anchorage and diameter of mini-implants (MIs) on the primary stability of these devices. METHODS: 60 self-drilling MIs were distributed in six groups according to diameter (1.5mm, 1.8mm or 2.0mm) and type of anchorage (monocortical and bicortical) in bovine rib. The primary stability was evaluated by insertion torque, micromobility and pull-out strength tests. ANOVA and/or Tukey analysis were used to conduct intergroup comparisons (p< 0.05). Non-parametric statistics (Kruskal-Wallis and Mann-Whitney) were performed when normality was not found (p< 0.05). RESULTS: MIs with larger diameters and bicortical anchorage showed greater primary stability regarding insertion torque (p< 0.05) and micromobility (p< 0.05). Only MI diameter had an effect on the pull-out strength test. Larger diameter MIs presented better retention in pull-out strength tests (p< 0.001), regardless of mono- or bicortical anchorage. CONCLUSIONS: MI primary stability is dependent on its diameter and type of anchorage. Bicortical anchorage showed greater stability when compared with monocortical anchorage, independently of other variables.

Miniscrew-assisted rapid palatal expansion (MARPE): how to achieve greater stability. In vitro study

ABSTRACT Objective: Assess the influence of mono- and bicortical anchorage and diameter of mini-implants (MIs) on the primary stability of these devices. Methods: 60 self-drilling MIs were distributed in six groups according to diameter (1.5mm, 1.8mm or 2.0mm) and type of anchorage (monocortical and bicortical) in bovine rib. The primary stability was evaluated by insertion torque, micromobility and pull-out strength tests. ANOVA and/or Tukey analysis were used to conduct intergroup comparisons (p< 0.05). Non-parametric statistics (Kruskal-Wallis and Mann-Whitney) were performed when normality was not found (p< 0.05). Results: MIs with larger diameters and bicortical anchorage showed greater primary stability regarding insertion torque (p< 0.05) and micromobility (p< 0.05). Only MI diameter had an effect on the pull-out strength test. Larger diameter MIs presented better retention in pull-out strength tests (p< 0.001), regardless of mono- or bicortical anchorage. Conclusions: MI primary stability is dependent on its diameter and type of anchorage. Bicortical anchorage showed greater stability when compared with monocortical anchorage, independently of other variables.

RESUMO Objetivo: Avaliar a influência da ancoragem mono e bicortical e do diâmetro dos mini-implantes (MIs) na estabilidade primária desses dispositivos. Métodos: 60 MIs autoperfurantes foram distribuídos em seis grupos, de acordo com o diâmetro (1,5 mm, 1,8 mm ou 2,0 mm) e tipo de ancoragem (monocortical e bicortical), e inseridos em costela bovina. A estabilidade primária foi avaliada pelos testes de torque de inserção, micromobilidade e resistência à tração. ANOVA e/ou análise de Tukey foram usadas para realizar comparações intergrupos (p< 0,05). Estatística não paramétrica (Kruskal-Wallis e Mann-Whitney) foi realizada quando a normalidade não foi encontrada (p< 0,05). Resultados: MIs com diâmetros maiores e ancorados bicorticalmente apresentaram maior estabilidade primária em relação ao torque de inserção (p< 0,05) e micromobilidade (p< 0,05). Apenas o diâmetro do MI influenciou os resultados do teste de resistência à tração. MIs de maior diâmetro apresentaram melhor retenção nos testes de resistência à tração (p< 0,001), independentemente da ancoragem mono ou bicortical. Conclusões: a estabilidade primária do MI é dependente de seu diâmetro e tipo de ancoragem. A ancoragem bicortical apresentou maior estabilidade quando comparada à ancoragem monocortical, independentemente das demais variáveis.

Dentofacial and skeletal pattern in African descendants from southeastern Brazil: clinical prospective study

ABSTRACT Objective: The aim of this study was to evaluate characteristics of African-Brazilians young adults with excellent dental occlusion, including bimaxillary protrusion; compare them to European-American Caucasian standards, and determine whether there is sexual dimorphism in the display of this phenotype. Methods: Lateral cephalometric radiographs were obtained from 43 African-Brazilians within military personnel (28 males and 15 females, average age 22.4 ± 3.4 years) with normal occlusion, selected from a group of 394 volunteers. Thirty-one angular and linear measurements were evaluated. Student's t-test for independent samples was used to compare results with those established by European-American standards, previously described in the literature. Results: Considering the dentoalveolar pattern, seven angular and six linear measurements showed statistically significant differences (p< 0.001) when compared to Caucasian cephalometric standards. African-Brazilians' subjects showed lower cranial base angle (SNAr = 119.87 ± 5.66º) and anterior cranial base length (SN-distance = 68.63 ± 4.50 mm) (p< 0.001). The maxilla (SNA = 88.51 ± 3.23º) and the mandible (SNB = 85.06 ± 3.24º) were protruded in relation to the SN line (p< 0.001). Sexual dimorphism was significant for L1.NB (degrees) (p< 0.01), and interincisal angle (U1.L1) (p< 0.05). Conclusion: African-Brazilian young adults presented differences regarding dental and craniofacial characteristics, when compared to European-American norms. It can be stated that Caucasian cephalometric norms should not be applied to African-Brazilian faces.

RESUMO Objetivo: O objetivo do presente estudo foi avaliar características de jovens adultos afro-brasileiros com oclusão excelente, incluindo protrusão bimaxilar, e compará-los com os padrões caucasianos europeu-americanos, para determinar se há dimorfismo sexual na exibição desse fenótipo. Métodos: Radiografias cefalométricas laterais foram obtidas de 43 afro-brasileiros militares (28 homens e 15 mulheres, idade média de 22,4 ± 3,4 anos) com oclusão normal, selecionados de um grupo de 394 voluntários. Foram avaliadas 31 medidas angulares e lineares. O teste t de Student para amostras independentes foi utilizado para comparar os resultados com os estabelecidos pelos padrões caucasianos europeu-americanos, descrito previamente na literatura. Resultados: Considerando o padrão dentoalveolar, sete medidas angulares e seis lineares apresentaram diferenças estatisticamente significativas (p< 0,001) quando comparadas aos padrões cefalométricos caucasianos. Sujeitos afro-brasileiros apresentaram menor ângulo da base do crânio (SNAr = 119,87 ± 5,66º) e comprimento da base craniana anterior (distância SN = 68,63 ± 4,50 mm) (p< 0,001). A maxila (SNA = 88,51 ± 3,23º) e a mandíbula (SNB = 85,06 ± 3,24º) estavam protruídas em relação à linha SN (p< 0,001). O dimorfismo de sexo foi significativo para L1.NB (graus) (p< 0,01) e ângulo interincisal (U1.L1) (p< 0,05). Conclusão: Jovens adultos afro-brasileiros apresentaram diferenças em relação às características dentárias e craniofaciais, quando comparados às normas europeias-americanas. Pode-se afirmar que as normas cefalométricas caucasianas não devem ser aplicadas às faces de indivíduos afro-brasileiros.

Integrated treatment between orthodontics and pediatric dentistry using the ulectomy technique: case report

Introduction: In the pediatric dental clinic the impacted teeth can be observedeventually, which can lead to the development of occlusion disorders. Objective:This study aimed to report a clinical case in which the surgical technique ofulectomy was used in conjunction with orthodontic treatment to aid the eruptionof a maxillary central incisor. Case Report: Male patient, 13 years old, Angle ClassI in the mixed dentition stage, with the tooth 21 impacted and reduced space forits eruption due to the migration of adjacent teeth. Fixed appliance was mountedwith Edgewise brackets using 0.20" stainless steel archwire with tight omega andactive spring between teeth 11 and 22 to recover the space of 21, but the passiveeruption was not observed. A fibrous gingival tissue was found, which by palpationrevealed the incisal edge of the tooth 21. The patient was referred to a pediatricdental clinic for a ulectomy. The minimally invasive surgical procedure consistedof the excision of the gingival tissue that covered the crown of the tooth 21 allowingits eruption in the dental arch. After the surgery, the teeth erupted and correctiveorthodontic treatment continued. Conclusion: The ulectomy technique associatedwith orthodontic treatment allowed to reestablish conditions for the developmentof dentition with satisfactory aesthetic and functional characteristics.

Introdução: Eventualmente na clínica odontológica, pode ser observada aimpacção de dentes, que pode acarretar transtornos para o desenvolvimento daoclusão. Objetivo: Objetivou-se relatar um caso clínico no qual a técnica cirúrgicade ulectomia foi utilizada, associada ao tratamento ortodôntico para auxiliar aerupção dentária de um incisivo central superior. Relato de Caso: Paciente dosexo masculino, 13 anos de idade, Classe I de Angle na fase de dentição mista, comdente 21 incluso e espaço reduzido para sua erupção em função da migração dosdentes adjacentes. Foi montado aparelho fixo com bráquetes prescrição Edgewise,utilizando arco 0,20" aço inoxidável com ômega justo e mola ativa entre osdentes 11 e 22 para recuperação do espaço do 21, mas não observou-se a erupçãopassiva. Constatou-se presença de tecido gengival fibroso que, ao toque,evidenciava a borda incisal do referido dente. O paciente foi encaminhado paraclínica de Odontopediatria para a realização da ulectomia. O procedimentocirúrgico minimamente invasivo, consistiu na exérese do tecido gengival querevestia a coroa do dente 21 não irrompido, permitindo sua erupção no arcodentário. Após a cirurgia, o dente irrompeu e o tratamento ortodôntico corretivoprosseguiu. Conclusão: A técnica da ulectomia associada ao tratamentoortodôntico permitiu restabelecer condições para desenvolvimento da dentiçãocom características estético-funcionais satisfatórias.